View PDF | Print View | Html Version
by: RayWalberg
Total views: 6
Word Count: 473

For those who need to cut a lot of wood for the winter or such, you may want to consider getting a log splitter. A log splitter will allow you to cut your fire wood or your furniture wood very quickly. You will be able to purchase one where other logging equipment is sold and you will be able to save a lot of time and money when you use a log splitter that you is used or that you made yourself. Log splitter plans are located throughout the World Wide Web and you will be able to make yourself one with the plans.

With a hydraulic log splitter you will find that it will run on gas or possibly diesel. The engine is attached to something called an oil pump and that is what will power the hydraulic cylinder. This is why the log cutter will split the wood quickly. However, you have to be concerned with the fact that the tank holds the oil and must be changed every now and then.

There are a lot of exciting features of the hydraulic splitter like the engine's power ranges from 5 to 8 horsepower. If you are using it for your home, you really only need a small engine, because the others are made for commercial use. For those who get a log splitter with a two stage oil pump, you will be able to cut your time down from days to hours. Cutting firewood comes in steps, but this way you can take some of the steps out and combine them to save a lot of time. They also have 10-25 tons of splitting force ready to use. They are very powerful and you need to be very careful when operating a log splitter.

As for some safety tips, most of them are common sense. You should never have your children operate the equipment. You need to make sure that the kids are no where near the equipment because they could still get hurt from the flying debris. You need to also wear good foot wear like steel-toed boots. It is recommended that you do not use loose clothing or even long sleeves, because they can get caught in the long splitter. Safety goggles are a must. Also, before you even use the splitter, you will need to be comfortable with the machine by reading all the instructions completely. You also should never make any adjustments to the settings while using the machine. It's suggested that you use the machine only during the day so that you can alert of where you are and what you are doing. Finally, keep in mind that this is a machine for only wood and nothing else. It's important that you use some common sense and always have the guards on the machine and never take them off.

About the Author

Ray Walberg is publishing essentially for http://www.insidewoodworking.com/ , a web page with information about second hand log splitter . His contributions on used log splitter can be found on his website .

Add Comment