Free Articles at Neutron Marketing Article Publishing and Distribution » Health-and-fitness » Fitness-equipment » Choosing Replacement Belt For Treadmill Damages

Next Article - Essentials Of A Treadmill Belt Lubricant

View PDF | Print View | Html Version
by: ChloeAdisson
Total views: 8
Word Count: 457

The part most prone to wear and tear is the belt for treadmill. It is therefore important for you to know how to properly maintain it and to know if there's a need to replace it. How do you check signs of damages?

The two most important parts of the treadmill are the belt and the deck. If the belt is not properly taken cared of, the deck's mechanical operation will also get affected.

Maintain your treadmill belt with lubricants especially if you run on it everyday. You will know if your belt needs replacement if you notice these items.

- When it curls on its edges.

- When the speed slows down the moment you step on the deck.

- There obvious grooves appear on your treadmill belt.

You may need to replace the belt if the walking surface generally looks worn-out. Otherwise, it may only need lubrication or waxing to keep it functional.

You will have to replace your belt if there are already signs of obvious damages mentioned above. If you do not have the instruction manual, here are the basic instructions.

Removing the belt

- The very first important thing you do is to pull out the plug. Make sure your treadmill is not connected to a power supply.

- Locate the hood of the treadmill's motor and remove it.

- Loosen and remove the screws on both sides to take out the rear roller. These are the same screws affecting the tension of the belt.

- The front roller can be removed using the same process. Incline the board if the screws are not accessible.

- After loosening the screws on both ends, remove the front and rear rollers.

- Take the belt out.

Replacing the belt for treadmill

- You need to lay the new belt and deck together. Slide the belt over the deck and align.

- Install the rollers and fasten the deck to the frame properly and securely.

- The next step is to fasten the belt and deck together with the screws. You may need to adjust the deck to get the screws in.

- Slide the belt in through the rear roller by pulling it to the rear end.

- Adjust the screws a bit to hold the parts together.

- Replace the drive motor belt over the drive gear by sliding the front roller inside the belt.

- Tighten the screws of the front and rear rollers until the belt fits snuggly on the deck.

- Adjust the belt. The adjustment concept is done by changing the speed to test the tightness and feel of your belt.

It's best not to do belt replacement yourself if you have not tried this procedure before. Seek help from someone who has more experience in replacing a belt for treadmill.

About the Author

Apply a treadmill belt lubricant to maintain the belt for treadmill. Learn more advice online.

---

Rating: Not yet rated

--Choose-- 0 1 2 3 4 5

No comments posted.

Add Comment

Enter the code shown